[. . . ] · Push in the on/off button and check that the on/off indicator light comes on. [. . . ] · Select the required programme by referring to the programme chart. · Select the desired programme by turning the selector knob. Before starting, it is essential that you carefully read right through the Installation & Operation Instruction booklet before plugging in to the mains socket. 1 Wash Salt Salt indicator light 2 1 2 Start / Stop Rinse Aid Salt End 3 4 5 PRE-WASH No Heat RAPID 35°C ECONOMY QUICK & CLEAN INTENSIVE 70°C 50°C 60°C On / Off 3 Rinse Aid Rinse-aid indicator light · Press start / stop button and check that the wash indicator light comes on. However, in case the door is opened while the machine is working, then a safety mechanism ensures the machine immediately stops. Care must be taken if opening the door, as steam and water will escape. It will start from the stage last carried out by the previous programme selection. * Values declared on the product or in the operating instruction booklet / programme chart and quick reference card supplied with the product are obtained in tests performed under controlled laboratory conditions and these tests are as defined in relevant standards. These figures may vary depending on how soiled the dishes are, the water hardness level and other factors. Temperature changes exceeding 15°C may also effect these figures. Beko plc, Beko House, Caxton Way, Watford, Hertfordshire, WD18 8UF Tel : 01923 654650 Fax : 01923 819653 e-mail: service@beko. co. uk www. beko. co. uk Printed in Turkey Part no: 17 2197 01 00-02 ** Reference programme for the Testing Institute and energy labelling. Testing program: Eco 50°C as compliant to EN 50242 international norms. [. . . ] Testing program: Eco 50°C as compliant to EN 50242 international norms. [. . . ]